Contact us

16 HDMI H.265 Encoder
NAME

Multipictures Monitor System

SOLUTION

As a TV operator, it is necessary to monitor the quality of the TV signal from the transmission center to the user at any time, so it is necessary to establish a multi-picture TV signal monitoring platform in order to timely inspect the signal.

8in1 DVBS2 IRD configuration guide

A. Open the IRD control software ” RAZZO NMS_5.40 ” , ,the management interface will be displayed .
B. Input or modify all of the satellite frequency parameter in the ” input parameter” column . Click the “Set” button will save the frequency parameters.


C. All signal quality strength is displayed in the “Signal Monitor” column.

D. Into the ” Multiplex” manu column, click the “Input Analyze” button to get all Input-Programs . Select the programs output which we need .

 

Attention : Each output channel can only hold a maximum of 8 programs .So total 8 output channels support max 64 programs .

E. Into the “TS over IP ” manu column , we can get all IP Stream Address . The transmission IP Stream format is : udp://@224.2.2.x:100xx .

For Example :
the 1st program “Brother fire TV Plus” output IP format is : udp://@224.2.2.1:10001 .
the 2nd program”SHALOM TV” output IP format is : udp://@224.2.2.2:10002 .
the 3rd program”Master’s TV” output IP format is : udp://@224.2.2.3:10003
………………..
the 8th program”Temple TV” output IP format is : udp://@224.2.2.8:10008
the 9th program”MMCN TV” output IP format is : udp://@224.2.2.9:10009
the 10th program”Temple TV” output IP format is : udp://@224.2.2.10:10010
………..
the 16th program”GOD GLORY GLOBAL”program output IP format is: udp://@224.2.2.16:10016

F. All programs IP Stream output by ” TS over IP ” port, This DATA port must be connected with the Decoder IP port by 1Giga switch HUB .

Warning: Don’t connect the “TS over IP ” port and the ” Ethernet ” port to the same switch HUB, Otherwise, You can’t manage and control the device .

 

HDMI Decoder configuration guide

A. 16in1 HDMI decoder management IP Address is from 192.168.8.200(01 port) to 192.168.8.215(16 port) . Please use a separate switch to connect the device and do not connect any other device externally.

Usually, we use computer manage the decoder, We don’t have access to the switch HUB connection, but instead directly connect the decoder network port one by one .example we want to manage the 01 network port, just insert the cable line into the port01 and input the 192.168.8.200 . if we want to manage 192.168.8.213 , just insert the cable line into the port14 .

B. Input the decoder IP-Address, then the decoder management interface will be display.

C. Click ” Decode ” manu , open the parameter configuration .Find the ” Input 1 ” option, input the program IP stream Address which come from the DVBS2 IRD .

D. 16in1 Decoder has 16 groups of IP interfaces port, and each interface port control one IP-Stream signal. Input the IP address of the IRD 16 programs to 16 ports in turn.

Example:

  • Decoder port-1 192.168.8.200 , Set the IPstream udp://@224.2.2.1:10001
  • Decoder port-2 192.168.8.201 , Set the IPstream udp://@224.2.2.2:10002
  • Decoder port-3 192.168.8.202 , Set the IPstream udp://@224.2.2.3:10003
  • Decoder port-4 192.168.8.203 , Set the IPstream udp://@224.2.2.4:10004
    ……………………….
  • ecoder port-8 192.168.8.207 , Set the IPstream udp://@224.2.2.8:10008
  • Decoder port-9 192.168.8.208 , Set the IPstream udp://@224.2.2.9:10009
    …………………….
  • Decoder port-10 192.168.8.209 , Set the IPstream udp://@224.2.2.10:10010
  • Decoder port-11 192.168.8.210 , Set the IPstream udp://@224.2.2.11:10011
    ………………………….
  • Decoder port-16 192.168.8.215 , Set the IPstream udp://@224.2.2.16:10016

 

E. After all the parameters are set up, the TV screen will be exported from the HDMI interface, Watching it by the TV.